Material Safety Data Sheet
Product Name: Polyacrylamide (PAM)
Section 1: Product and Company Identification
- Product Name: Polyacrylamide
- Synonyms: Acrylamide homopolymer, PAM
- Manufacturer: [Company Name]
- Address: [Company Address]
- Emergency Phone: [Emergency Contact Number]
Section 2: Composition/Information on Ingredients
- Chemical Formula: [C3H5NO]n
- CAS No.: 9003-05-8
- Component: Polyacrylamide
- Concentration: 100%
Section 3: Hazards Identification
- Potential Health Effects:
- Eye Contact: Causes mild irritation.
- Skin Contact: May cause skin irritation.
- Inhalation: Not expected to be harmful under normal conditions of use.
- Ingestion: Harmful if swallowed.
Section 4: First Aid Measures
- Eye Contact: Rinse eyes with water for at least 15 minutes. Seek medical attention if irritation persists.
- Skin Contact: Wash contaminated skin with soap and water. Remove contaminated clothing.
- Inhalation: Move to fresh air. If breathing is difficult, give oxygen. Seek medical attention.
- Ingestion: Do not induce vomiting. Drink plenty of water or milk. Seek medical attention.
Section 5: Fire Fighting Measures
- Suitable Extinguishing Media: Water spray, foam, dry chemical, carbon dioxide.
- Specific Hazards: Non-flammable. However, thermal decomposition may produce toxic fumes.
Section 6: Accidental Release Measures
- Personal Precautions: Wear appropriate personal protective equipment.
- Environmental Precautions: Avoid discharge into water bodies. Collect spillage using absorbent materials.
Section 7: Handling and Storage
- Handling: Use in well-ventilated areas. Avoid dust formation. Use proper engineering controls.
- Storage: Store in a cool, dry place. Keep container tightly closed.
Section 8: Exposure Controls/Personal Protection
- Engineering Controls: Local exhaust ventilation or other engineering controls to keep airborne concentrations below occupational exposure limits.
- Personal Protective Equipment: Wear gloves, safety goggles, and respiratory protection as necessary.
Section 9: Physical and Chemical Properties
- Appearance: White powder or granules
- Odor: Odorless
- Melting Point: Decomposes before melting
- Boiling Point: N/A
- Density: ~1.3 g/cm³
- Solubility: Highly soluble in water
Section 10: Stability and Reactivity
- Chemical Stability: Stable under normal conditions of use.
- Conditions to Avoid: Heat, open flames, and direct sunlight.
- Hazardous Decomposition Products: Carbon monoxide, carbon dioxide, ammonia.
Section 11: Toxicological Information
- Acute Toxicity: Oral LD50 >5000 mg/kg (rat)
- Carcinogenicity: Not classified as carcinogenic by IARC or OSHA.
Section 12: Ecological Information
- Ecotoxicity: Low toxicity to aquatic organisms.
- Biodegradability: Readily biodegradable.
Section 13: Disposal Considerations
- Waste Disposal: Dispose of in accordance with local regulations. Avoid discharge into the environment.
Section 14: Transport Information
- UN Number: N/A
- Packaging Group: N/A
- Transport Hazard Class: N/A
Section 15: Regulatory Information
- Regulatory Status: Complies with applicable international regulations.
Section 16: Other Information
- Revision Date: [Date]
- Disclaimer: This document provides general information and should not be used as a substitute for professional advice.
Please note that the specific details such as company name, address, emergency phone number, and revision date have been left blank for confidentiality purposes. These sections should be filled out by the manufacturer or supplier providing the MSDS.
This Material Safety Data Sheet is intended to provide workers and emergency personnel with procedures for handling or working with this material in a safe manner. It includes information on the properties, hazards, and safe handling practices of polyacrylamide.
